Manufacturing Engineer, CNC & Sheet Metal
Fab2 · On-site
MeritLog read this listing from Fab2's Ashby job board and last checked it on September 9, 2026.
Source: the employer's Ashby job board. Open the original listing for current details.
Job details
- Work model
- On-site
- Salary
- Not listed by source
- Location
- Lockhart
Hiring context
How this role compares at Fab2
Fab2 has 59 live roles in MeritLog’s catalog across 5 job families, and 55 of them are in engineering. 31 of those listings publish a pay range, a disclosure rate of 53%.
Fab2 concentrates this hiring in:
Counted across the job boards MeritLog tracks, at the time this page was served. Pay comparisons use only listings that publish a complete range in the same currency and period.
What the role asks for
What you'd do
- CNC programming on 5-axis Haas UMC-500SS / UMC-750SS and DS-30Y mill-turn lathes. Goal: drop chassis-mix mill cycle from ~45 min/part to ~20 min/part over the first 12 months.
- Trumpf TruLaser 1030 + TruBend 5085 SX programming via TruTops Boost. Nest optimization, bend sequencing, ACB Laser calibration.
- Fixturing strategy: vises, soft jaws, pallet-pool tombstones, brake tooling library.
- Tool selection, tool-life tracking, and coolant/chip handling specs.
- Process documentation that holds up under operator turnover.
- 5+ years CNC machining / sheet-metal manufacturing engineering
- Hands-on Haas 5-axis programming (Mastercam, Fusion 360, or HSMWorks)
- Trumpf or comparable fiber-laser + press-brake experience
- Comfort owning a process from blank stock to inspected part
What they're asking for
- Experience scaling a startup factory from first article build to productionSkillPreferred
- TruTops Boost specificallySkillPreferred
- SEMI-grade or aerospace tolerance workSkillPreferred
- Lights-out / pallet-pool experienceSkillPreferred
- Medical, Dental, and Vision insuranceSkillPreferred
- Generous Paid Time Off inclusive of Holidays and Sick TimeSkillPreferred
- Visa SponsorshipSkillPreferred
- Life and Disability InsuranceSkillPreferred
- Paid Parental LeaveSkillPreferred
- 401(k) retirement planSkillPreferred
- Weekly Learning & Development opportunitiesSkillPreferred
- Commuter Benefits including Parking and Late Night Uber rides from the officeSkillPreferred
- Lunches daily, Dinners 3x per week, Stocked Office Kitchen with Snacks and SpindriftsSkillPreferred
Parsed by MeritLog from the employer’s own posting. The full description follows below.
Job description
About fab2 The fab2 team can build anything. We design all the hardware and software needed to make chips and we make the fabs, tools, and components ourselves. We're looking for exceptional, hands-on people who can iterate to the limits of what's possible. fab2 was founded by Sam Zeloof https://www.youtube.com/@SamZeloof and Jim Keller https://en.wikipedia.org/wiki/Jim_Keller_(engineer). Sam is best known for making chips in his garage, and Jim has been a leader in the semiconductor industry for the past 40 years. About the team The fab2 production team manufactures chip fabs. From deposition and etching tools to lithography and metrology, we are building every tool ourselves. We fabricate the metal parts, operate SMT lines to build PCBAs, and assemble the tools in-house. About the role The Manufacturing Engineer is the technical owner of how various tools get integrated and built. Cycle times, fixturing, programming, and process maturity all flow from this seat. The difference between hitting production goals in our first quarter is largely the work this role owns. Responsibilities - CNC programming on 5-axis Haas UMC-500SS / UMC-750SS and DS-30Y mill-turn lathes. Goal: drop chassis-mix mill cycle from ~45 min/part to ~20 min/part over the first 12 months. - Trumpf TruLaser 1030 + TruBend 5085 SX programming via TruTops Boost. Nest optimization, bend sequencing, ACB Laser calibration. - Fixturing strategy: vises, soft jaws, pallet-pool tombstones, brake tooling library. - Tool selection, tool-life tracking, and coolant/chip handling specs. - Process documentation that holds up under operator turnover. Required Experience - 5+ years CNC machining / sheet-metal manufacturing engineering - Hands-on Haas 5-axis programming (Mastercam, Fusion 360, or HSMWorks) - Trumpf or comparable fiber-laser + press-brake experience - Comfort owning a process from blank stock to inspected part Nice-to-have - Experience scaling a startup factory from first article build to production - TruTops Boost specifically - SEMI-grade or aerospace tolerance work - Lights-out / pallet-pool experience Working at fab2 We’re an early-stage hardware startup with solid funding, world-class advisors, and labs/offices in Austin, TX, Lockhart, TX, and San Francisco, CA. Benefits: fab2 offers the following benefits, subject to applicable eligibility requirements: - Medical, Dental, and Vision insurance - Generous Paid Time Off inclusive of Holidays and Sick Time - Visa Sponsorship - Life and Disability Insurance - Paid Parental Leave - 401(k) retirement plan - Weekly Learning & Development opportunities - Commuter Benefits including Parking and Late Night Uber rides from the office - Lunches daily, Dinners 3x per week, Stocked Office Kitchen with Snacks and Spindrifts We are an equal-opportunity employer and do not discriminate on the basis of race, religion, national origin, gender, sexual orientation, age, veteran status, disability or other legally protected statuses. Export Control Analysis: This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. fab2, formerly known as Atomic Semi
Keep exploring