Operations Technician, Robotics Hardware
FieldAI · On-site
MeritLog read this listing from FieldAI's Lever job board and last checked it on September 11, 2026.
Source: the employer's Lever job board. Open the original listing for current details.
Job details
- Work model
- On-site
- Salary
- $30 - $55
- Location
- Irvine, CA
- Company website
- www.fieldai.com
Hiring context
How this role compares at FieldAI
FieldAI has 131 live roles in MeritLog’s catalog across 7 job families, and 7 of them are in operations. 95 of those listings publish a pay range, a disclosure rate of 73%.
This role's posted range of $30 - $55 sits above 85% of the 13 other FieldAI roles quoted over the same currency and period.
FieldAI concentrates this hiring in:
Counted across the job boards MeritLog tracks, at the time this page was served. Pay comparisons use only listings that publish a complete range in the same currency and period.
Job description
Who are We? Field AIis transforming how robots interact with the real world. We are building risk-aware, reliable, and field-ready AI systems that address the most complex challenges in robotics, unlocking the full potential of embodied intelligence. We go beyond typical data-driven approaches or pure transformer-based architectures, and are charting a new course, with already-globally-deployed solutions delivering real-world results and rapidly improving models through real-field applications. Learn more at https://fieldai.com. About the Job Operations Technician Role As an Assembly Technician for Perception & Compute Payloads, you will be a hands-on contributor responsible for assembling, integrating, and validating Field AI’s sensing and compute payloads. You will build electro-mechanical subsystems, integrate sensors and embedded compute platforms, perform harnessing and power system checks, support functional testing, and ensure every payload is field-ready and reliable. This role bridges mechanical assembly, electrical integration, and practical system-level debugging. You will support both prototype development and production workflows while working closely with engineers to improve build processes and increase system reliability. What You’ll Get To Do 1. Payload Assembly & Integration ● Assemble perception payloads including LiDAR, cameras, IMUs, GPS receivers, and auxiliary sensors using engineering drawings and build instructions. ● Install and integrate CPU/GPU compute modules, carrier boards, and microcontroller-based subsystems. ● Build and route wire harnesses for power, high-speed data, synchronization, and control. ● Install mounts, enclosures, gaskets, seals, thermal components, and structural hardware. 2. Electrical, Power, and Communication Bring-Up ● Perform continuity checks, grounding/EMI checks, and power-rail validation. ● Assist in bring-up of Linux- or ROS2-based embedded compute systems. ● Validate communication links across Ethernet, USB, CAN, GMSL, and other interfaces. ● Verify correct pinouts and harness strain-relief practices. 3. System Testing & Quality Assurance ● Run functional tests including sensor bring-up, calibration checks, compute boot/health tests, and network verification. ● Document test results, deviations, rework, and repair actions with high accuracy. ● Support environmental, vibration, mechanical alignment, and thermal characterization tests led by hardware engineers. ● Conduct inspections for workmanship quality, mechanical stability, and electrical safety. 4. Debugging & Continuous Improvement ● Diagnose wiring faults, mechanical misalignments, intermittent communication issues, thermal faults, and other integration failures. ● Work closely with electrical, mechanical, and compute engineers to root-cause issues and improve build processes. ● Provide feedback on assembly workflows, documentation clarity, and opportunities to streamline production. 5. Field & Operations Support ● Prepare, stage, and service payloads for real-world deployment. ● Support integration and troubleshooting activities during lab tests, field trials, and live demonstrations. ● Perform rapid repairs and reconfigurations in dynamic testing environments. What You Have ● 2+ years of hands-on technician experience in robotics, aerospace, electronics, automotive, or related electro-mechanical assembly environments. ● Proficiency with hand tools, power tools, torque drivers, and basic machine-shop tools. ● Ability to read and follow wiring diagrams, mechanical drawings, and assembly instructions. ● Experience building wire harnesses and working with low-voltage electrical systems. ● Familiarity with embedded compute systems, sensors, or robotics hardware. ● Strong attention to detail, documentation discipline, and ability to deliver reliable assemblies. ● Ability to lift up to 50 lbs. and work in workshop, lab, or field environments. The Extras That Set You Apart ● Experience working with perception systems such as LiDAR, cameras, radar, or IMUs. ● Familiarity with Linux, ROS2, or embedded system bring-up workflows. ● Soldering, crimping, or IPC-certified workmanship skills. ● Understanding of thermal management, weather sealing, EMI/EMC basics, and ruggedized mechanical design. ● Experience supporting prototype builds, rapid iteration cycles, or field test deployments. ● Ability to design or suggest simple fixtures or jigs to improve assembly and repeatability. ● Experience assembling complex electro-mechanical systems, especially robotics, drones, or ruggedized field hardware.
Keep exploring