Computer Numerically...: Connecticut vs North Dakota pay

Percentile	Published wages	Connecticut	North Dakota
10th	Connecticut$58,700North Dakota$61,280	$58,700	$61,280
25th	Connecticut$67,490North Dakota$65,990	$67,490	$65,990
Median

Place	Employment	Jobs per 1,000	Location quotient	Employment RSE
Connecticut	500Jobs per 1,000: 0.29 Location quotient: 1.6	0.29	1.6	9.1%
North Dakota	40Jobs per 1,000: 0.1 Location quotient: 0.53	0.1	0.53	24%

75th	Connecticut$101,500North Dakota$82,030	$101,500	$82,030

90th	Connecticut$118,110North Dakota$93,900	$118,110	$93,900

Start with the answer

Computer Numerically Controlled Tool Programmers pay in Connecticut and North Dakota

The May 2025 BLS OEWS median for Computer Numerically Controlled Tool Programmers is $86,390 per year in Connecticut. It is $75,990 per year in North Dakota. Connecticut is 13.7% above North Dakota on the published median.

Both rows use SOC 51-9162 and the same annual wage metric. Median means the middle of each area's published wage spread. It is not one worker's pay. The larger median is not proof that one place gives a better job or a better result. It is one wage fact from one source period.

BLS lists 500 wage and salary jobs in Connecticut and 40 in North Dakota. Those are survey job counts, not open posts. Read pay, job scale, local share, and price level as separate facts before you make a choice.

Evidence: bls-oews-may-2025 · Rule: same-soc-same-metric-pair · nominal-median-gap · employment-not-openings

Pay range

Compare the full Computer Numerically Controlled Tool Programmers wage ladder

A median can hide a wide range. The 10th, 25th, 50th, 75th, and 90th percentile points show more of each area's spread. A percentile is a rank point. It is not a career stage. The 10th point does not mean new-worker pay. The 90th point does not mean a wage that comes after a set number of years.

The lower half can differ from the upper half. One area can lead at the median and trail at another point. Read each field against the same field in the other area. Do not compare one area's 75th percentile with the other area's median. That would answer a different question.

A posted job range can sit below, across, or above these marks. That does not make the post wrong. A listing can differ by employer, level, hours, field, or work rules. Keep the listing tied to that employer. Keep the BLS range tied to the whole role-place row.

10th percentile: Connecticut is $58,700 per year; North Dakota is $61,280 per year. Connecticut is 4.2% below North Dakota at this point.
25th percentile: Connecticut is $67,490 per year; North Dakota is $65,990 per year. Connecticut is 2.3% above North Dakota at this point.
Median: Connecticut is $86,390 per year; North Dakota is $75,990 per year. Connecticut is 13.7% above North Dakota at this point.
75th percentile: Connecticut is $101,500 per year; North Dakota is $82,030 per year. Connecticut is 23.7% above North Dakota at this point.
90th percentile: Connecticut is $118,110 per year; North Dakota is $93,900 per year. Connecticut is 25.8% above North Dakota at this point.

Evidence: bls-oews-may-2025 · Rule: paired-percentile-fields · same-field-comparison · posted-pay-separation

Shape of pay

Mean and median tell two parts of the Computer Numerically Controlled Tool Programmers story

Connecticut has a mean of $87,710 per year and a median of $86,390. North Dakota has a mean of $78,290 per year and a median of $75,990. Mean adds all wage values and splits the total by the number of jobs behind the estimate.

Connecticut's mean is 1.5% above its median on the same published median. North Dakota's mean is 3.0% above its median on the same published median. The gaps show that each wage spread has a shape. They do not explain why the shape differs.

Use median for the middle. Use mean to see how the full set pulls. Use percentiles to see more of the spread. None of the three is a pay promise. A person, team, or listing can sit far from all three for reasons that are outside these BLS rows.

Evidence: bls-oews-may-2025 · Rule: paired-mean-median · mean-median-gap · no-causal-inference

Job scale

How the two Computer Numerically Controlled Tool Programmers job bases differ

Connecticut has 500 estimated Computer Numerically Controlled Tool Programmers jobs. North Dakota has 40. The larger count shows a larger covered job base in this source. It does not show more open roles, faster hiring, or a better chance for one applicant.

Connecticut has 0.29 Computer Numerically Controlled Tool Programmers jobs per 1,000 local jobs. North Dakota has 0.1 per 1,000. This rate helps compare places of different size. It is not a job-post rate and does not use the MeritLog catalog.

The employment RSE is 9.1% in Connecticut and 24% in North Dakota. RSE means relative standard error. It is a survey precision flag. It is not the chance that the job count or one person's pay is right.

Evidence: bls-oews-may-2025 · Rule: paired-employment · paired-jobs-per-thousand · employment-rse-field-scope

Local share

Where Computer Numerically Controlled Tool Programmers takes a larger share of jobs

The location quotient is 1.6 in Connecticut and 0.53 in North Dakota. A value of 1 means the role has the same share of local jobs as it has across the nation. A value above 1 means the local share is larger. A value below 1 means it is smaller.

Connecticut's quotient is 201.9% above North Dakota's. That gap is about the job mix. It is not a wage gap, a job-count gap, or a growth claim.

Read location quotient with employment. A small place can have a high share and few jobs. A large place can have many jobs and a share near the national mark. Then read pay as its own field. The three measures do not form one score.

Evidence: bls-oews-may-2025 · Rule: paired-location-quotient · quotient-gap · metric-separation

BEA price view

How price levels differ between Connecticut and North Dakota

BEA's 2024 all-items price index is 103.6 in Connecticut and 89.0 in North Dakota. The U.S. level is 100. A higher number means the broad local price level is higher than the national mark. It does not say a place is good or bad.

Housing is 117.0 in Connecticut and 71.4 in North Dakota. Goods are 97.3 and 95.7. Utilities are 146.5 and 73.7. Other services are 102.7 and 91.2. The parts can move in different ways.

The wage period is May 2025. The price period is 2024. WageScope keeps those clocks visible. It uses the all-items index for one clear proxy. It does not mix BEA prices into the BLS source row, and it does not claim the two releases describe the exact same month.

Evidence: bea-rpp-2024 · bls-oews-may-2025 · Rule: paired-rpp-fields · rpp-us-baseline · source-period-separation

Price-level proxy

Compare the medians in national-price dollars

WageScope divides Connecticut's $86,390 median by 103.6 divided by 100. The result is $83,380 per year. It divides North Dakota's $75,990 median by 89.0 divided by 100. That result is $85,421 per year.

Connecticut's proxy is 2.4% below North Dakota's. The nominal gap is 13.7%. The order can stay the same or change after the price-level step. Both results must keep their labels.

The proxy is a narrow math tool. It is not take-home pay. It does not add taxes, benefits, household size, debt, commute, schools, safety, climate, or taste. It does not set a wage target. Use it to see how one broad price index changes the wage view, then check your own costs outside WageScope.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-bounded-comparison-v1 · Rule: price-level-adjusted-formula · nominal-adjusted-gap-separation · proxy-limits

Same-proxy pay

What equal price-level pay would look like in the other place

$86,390 per year in Connecticut has the same national-price-dollar proxy as $74,174 per year in North Dakota. The math keeps Connecticut's proxy fixed, then applies North Dakota's all-items price index.

$75,990 per year in North Dakota has the same proxy as $88,505 per year in Connecticut. This reverse view is useful because the answer depends on which wage you start with. It is not a claim about an offer in either place.

Equivalent nominal pay uses one broad price measure. It does not know what a person buys. It does not know rent, family size, debt, taxes, travel, benefits, or savings. Treat the result as a clean source-backed comparison, not a full move plan or a number an employer must match.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-bounded-comparison-v1 · Rule: equivalent-nominal-value-forward · equivalent-nominal-value-reverse · proxy-limits

Data care

Check the survey marks before you use the gap

The mean-wage RSE is 1.9% in Connecticut and 4.1% in North Dakota. The employment RSE is 9.1% and 24%. RSE is a precision flag for the field it sits beside. It is not a score for the whole page.

BLS does not publish the same RSE field for the median and each percentile. WageScope does not move a mean RSE to the median. It does not use an employment RSE as a wage care mark. Each value stays tied to its source field. Missing or top-coded values also keep their source state.

A later BLS or BEA release can change the result. MeritLog checks the official source clocks before promotion. The page cannot call its data current when a newer complete release is waiting for review. Current job cards have their own seen date and do not make the government data newer.

Evidence: bls-oews-may-2025 · Rule: paired-rse-field-scope · no-rse-transfer · independent-source-freshness

Use the result

A short check list for Connecticut and North Dakota

Start with the same Computer Numerically Controlled Tool Programmers wage field. Then read the full percentile spread. Check job count, jobs per 1,000, and location quotient. Add the 2024 all-items and housing price levels. Read the national-price-dollar proxy with its limits. Keep the BLS and BEA dates in view.

Next, inspect one current employer-title match in each place when an exact public place match exists. A job post can show work level, hours, location rules, and pay that the BLS row cannot. The post is dated employer evidence. It does not change the survey median or prove a broad trend.

Last, use your own facts. Compare the job needs with work you have done and can support. A wage gap cannot show fit. A price-level gap cannot show fit. A job count cannot show fit. MeritLog's résumé path starts only after you choose a listing and confirm the work facts you want to use.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-public-job-boundary-v1 · Rule: comparison-checklist · job-source-separation · confirmed-resume-evidence

Limits

What this Computer Numerically Controlled Tool Programmers comparison does not decide

The page does not choose Connecticut or North Dakota for you. It does not say what one worker earns. It does not promise a job, offer, raise, or move result. It does not say why the medians differ. It does not turn the larger wage, job count, quotient, or proxy into a place score.

The comparison leaves out people who work for themselves and other work outside the OEWS scope. It does not add taxes, take-home pay, benefits, stock, bonus pay, hours, travel, remote work, or a household budget. Current listings are separate and can be empty even when the government rows are complete.

Use this page for a bounded choice. Compare the same May 2025 BLS role and metric across two exact areas. Add the separate 2024 BEA price view. Inspect dated employer-title matches. Then build a résumé from facts you have confirmed. Keep each source tied to the question it can answer.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-public-job-boundary-v1 · Rule: no-place-choice · no-personal-pay-claim · source-purpose-separation

Computer Numerically Controlled Tool Programmers: Connecticut vs North Dakota

Same occupation, same annual wage metric

The winner can change when local prices differ

Housing and all-items indexes explain the adjustment

Equivalent nominal pay, using price levels only

Employment scale and local concentration

Compare another occupation or pair

Computer Numerically Controlled Tool Programmers: Connecticut and North Dakota guide

Computer Numerically Controlled Tool Programmers in Connecticut and North Dakota: common questions

Compare Computer Numerically Controlled Tool Programmers listings by place

Connecticut

No precise employer-title matches in this place right now.

North Dakota

No precise employer-title matches in this place right now.

Current jobs

Tailor for a real Computer Numerically Controlled Tool Programmers job, not a generic wage number.

Computer Numerically Controlled Tool Programmers pay in Connecticut and North Dakota

Compare the full Computer Numerically Controlled Tool Programmers wage ladder

Mean and median tell two parts of the Computer Numerically Controlled Tool Programmers story

How the two Computer Numerically Controlled Tool Programmers job bases differ

Where Computer Numerically Controlled Tool Programmers takes a larger share of jobs

How price levels differ between Connecticut and North Dakota

Compare the medians in national-price dollars

What equal price-level pay would look like in the other place

Check the survey marks before you use the gap

A short check list for Connecticut and North Dakota

What this Computer Numerically Controlled Tool Programmers comparison does not decide

Compare Computer Numerically Controlled Tool Programmers listings by place

Connecticut

No precise employer-title matches in this place right now.

North Dakota

No precise employer-title matches in this place right now.

Privacy choices

Computer Numerically Controlled Tool Programmers: Connecticut vs North Dakota

Same occupation, same annual wage metric

The winner can change when local prices differ

Housing and all-items indexes explain the adjustment

Equivalent nominal pay, using price levels only

Employment scale and local concentration

Compare another occupation or pair

Computer Numerically Controlled Tool Programmers: Connecticut and North Dakota guide

Computer Numerically Controlled Tool Programmers in Connecticut and North Dakota: common questions

Compare Computer Numerically Controlled Tool Programmers listings by place

Connecticut

No precise employer-title matches in this place right now.

North Dakota

No precise employer-title matches in this place right now.

Current jobs

Tailor for a real Computer Numerically Controlled Tool Programmers job, not a generic wage number.

Computer Numerically Controlled Tool Programmers pay in Connecticut and North Dakota

Compare the full Computer Numerically Controlled Tool Programmers wage ladder

Mean and median tell two parts of the Computer Numerically Controlled Tool Programmers story

How the two Computer Numerically Controlled Tool Programmers job bases differ

Where Computer Numerically Controlled Tool Programmers takes a larger share of jobs

How price levels differ between Connecticut and North Dakota

Compare the medians in national-price dollars

What equal price-level pay would look like in the other place

Check the survey marks before you use the gap

A short check list for Connecticut and North Dakota

What this Computer Numerically Controlled Tool Programmers comparison does not decide

Compare Computer Numerically Controlled Tool Programmers listings by place

Connecticut

No precise employer-title matches in this place right now.

North Dakota

No precise employer-title matches in this place right now.