Structural Metal Fabricators and Fitters: Georgia vs Maine pay

Percentile	Published wages	Georgia	Maine
10th	Georgia$37,630Maine$49,350	$37,630	$49,350
25th	Georgia$44,040Maine$57,120	$44,040	$57,120
Median	Georgia

Place	Employment	Jobs per 1,000	Location quotient	Employment RSE
Georgia	560Jobs per 1,000: 0.11 Location quotient: 0.34	0.11	0.34	16.5%
Maine	770Jobs per 1,000: 1.2 Location quotient: 3.58	1.2	3.58	2.9%

75th	Georgia$61,010Maine$64,760	$61,010	$64,760

90th	Georgia$69,330Maine$75,790	$69,330	$75,790

Start with the answer

Structural Metal Fabricators and Fitters pay in Georgia and Maine

The May 2025 BLS OEWS median for Structural Metal Fabricators and Fitters is $50,010 per year in Georgia. It is $64,760 per year in Maine. Georgia is 22.8% below Maine on the published median.

Both rows use SOC 51-2041 and the same annual wage metric. Median means the middle of each area's published wage spread. It is not one worker's pay. The larger median is not proof that one place gives a better job or a better result. It is one wage fact from one source period.

BLS lists 560 wage and salary jobs in Georgia and 770 in Maine. Those are survey job counts, not open posts. Read pay, job scale, local share, and price level as separate facts before you make a choice.

Evidence: bls-oews-may-2025 · Rule: same-soc-same-metric-pair · nominal-median-gap · employment-not-openings

Pay range

Compare the full Structural Metal Fabricators and Fitters wage ladder

A median can hide a wide range. The 10th, 25th, 50th, 75th, and 90th percentile points show more of each area's spread. A percentile is a rank point. It is not a career stage. The 10th point does not mean new-worker pay. The 90th point does not mean a wage that comes after a set number of years.

The lower half can differ from the upper half. One area can lead at the median and trail at another point. Read each field against the same field in the other area. Do not compare one area's 75th percentile with the other area's median. That would answer a different question.

A posted job range can sit below, across, or above these marks. That does not make the post wrong. A listing can differ by employer, level, hours, field, or work rules. Keep the listing tied to that employer. Keep the BLS range tied to the whole role-place row.

10th percentile: Georgia is $37,630 per year; Maine is $49,350 per year. Georgia is 23.7% below Maine at this point.
25th percentile: Georgia is $44,040 per year; Maine is $57,120 per year. Georgia is 22.9% below Maine at this point.
Median: Georgia is $50,010 per year; Maine is $64,760 per year. Georgia is 22.8% below Maine at this point.
75th percentile: Georgia is $61,010 per year; Maine is $64,760 per year. Georgia is 5.8% below Maine at this point.
90th percentile: Georgia is $69,330 per year; Maine is $75,790 per year. Georgia is 8.5% below Maine at this point.

Evidence: bls-oews-may-2025 · Rule: paired-percentile-fields · same-field-comparison · posted-pay-separation

Shape of pay

Mean and median tell two parts of the Structural Metal Fabricators and Fitters story

Georgia has a mean of $53,130 per year and a median of $50,010. Maine has a mean of $62,410 per year and a median of $64,760. Mean adds all wage values and splits the total by the number of jobs behind the estimate.

Georgia's mean is 6.2% above its median on the same published median. Maine's mean is 3.6% below its median on the same published median. The gaps show that each wage spread has a shape. They do not explain why the shape differs.

Use median for the middle. Use mean to see how the full set pulls. Use percentiles to see more of the spread. None of the three is a pay promise. A person, team, or listing can sit far from all three for reasons that are outside these BLS rows.

Evidence: bls-oews-may-2025 · Rule: paired-mean-median · mean-median-gap · no-causal-inference

Job scale

How the two Structural Metal Fabricators and Fitters job bases differ

Georgia has 560 estimated Structural Metal Fabricators and Fitters jobs. Maine has 770. The larger count shows a larger covered job base in this source. It does not show more open roles, faster hiring, or a better chance for one applicant.

Georgia has 0.11 Structural Metal Fabricators and Fitters jobs per 1,000 local jobs. Maine has 1.2 per 1,000. This rate helps compare places of different size. It is not a job-post rate and does not use the MeritLog catalog.

The employment RSE is 16.5% in Georgia and 2.9% in Maine. RSE means relative standard error. It is a survey precision flag. It is not the chance that the job count or one person's pay is right.

Evidence: bls-oews-may-2025 · Rule: paired-employment · paired-jobs-per-thousand · employment-rse-field-scope

Local share

Where Structural Metal Fabricators and Fitters takes a larger share of jobs

The location quotient is 0.34 in Georgia and 3.58 in Maine. A value of 1 means the role has the same share of local jobs as it has across the nation. A value above 1 means the local share is larger. A value below 1 means it is smaller.

Georgia's quotient is 90.5% below Maine's. That gap is about the job mix. It is not a wage gap, a job-count gap, or a growth claim.

Read location quotient with employment. A small place can have a high share and few jobs. A large place can have many jobs and a share near the national mark. Then read pay as its own field. The three measures do not form one score.

Evidence: bls-oews-may-2025 · Rule: paired-location-quotient · quotient-gap · metric-separation

BEA price view

How price levels differ between Georgia and Maine

BEA's 2024 all-items price index is 96.3 in Georgia and 97.0 in Maine. The U.S. level is 100. A higher number means the broad local price level is higher than the national mark. It does not say a place is good or bad.

Housing is 88.7 in Georgia and 78.9 in Maine. Goods are 98.9 and 97.2. Utilities are 92.8 and 135.2. Other services are 97.3 and 103.2. The parts can move in different ways.

The wage period is May 2025. The price period is 2024. WageScope keeps those clocks visible. It uses the all-items index for one clear proxy. It does not mix BEA prices into the BLS source row, and it does not claim the two releases describe the exact same month.

Evidence: bea-rpp-2024 · bls-oews-may-2025 · Rule: paired-rpp-fields · rpp-us-baseline · source-period-separation

Price-level proxy

Compare the medians in national-price dollars

WageScope divides Georgia's $50,010 median by 96.3 divided by 100. The result is $51,935 per year. It divides Maine's $64,760 median by 97.0 divided by 100. That result is $66,728 per year.

Georgia's proxy is 22.2% below Maine's. The nominal gap is 22.8%. The order can stay the same or change after the price-level step. Both results must keep their labels.

The proxy is a narrow math tool. It is not take-home pay. It does not add taxes, benefits, household size, debt, commute, schools, safety, climate, or taste. It does not set a wage target. Use it to see how one broad price index changes the wage view, then check your own costs outside WageScope.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-bounded-comparison-v1 · Rule: price-level-adjusted-formula · nominal-adjusted-gap-separation · proxy-limits

Same-proxy pay

What equal price-level pay would look like in the other place

$50,010 per year in Georgia has the same national-price-dollar proxy as $50,403 per year in Maine. The math keeps Georgia's proxy fixed, then applies Maine's all-items price index.

$64,760 per year in Maine has the same proxy as $64,255 per year in Georgia. This reverse view is useful because the answer depends on which wage you start with. It is not a claim about an offer in either place.

Equivalent nominal pay uses one broad price measure. It does not know what a person buys. It does not know rent, family size, debt, taxes, travel, benefits, or savings. Treat the result as a clean source-backed comparison, not a full move plan or a number an employer must match.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-bounded-comparison-v1 · Rule: equivalent-nominal-value-forward · equivalent-nominal-value-reverse · proxy-limits

Data care

Check the survey marks before you use the gap

The mean-wage RSE is 2.7% in Georgia and 0.5% in Maine. The employment RSE is 16.5% and 2.9%. RSE is a precision flag for the field it sits beside. It is not a score for the whole page.

BLS does not publish the same RSE field for the median and each percentile. WageScope does not move a mean RSE to the median. It does not use an employment RSE as a wage care mark. Each value stays tied to its source field. Missing or top-coded values also keep their source state.

A later BLS or BEA release can change the result. MeritLog checks the official source clocks before promotion. The page cannot call its data current when a newer complete release is waiting for review. Current job cards have their own seen date and do not make the government data newer.

Evidence: bls-oews-may-2025 · Rule: paired-rse-field-scope · no-rse-transfer · independent-source-freshness

Use the result

A short check list for Georgia and Maine

Start with the same Structural Metal Fabricators and Fitters wage field. Then read the full percentile spread. Check job count, jobs per 1,000, and location quotient. Add the 2024 all-items and housing price levels. Read the national-price-dollar proxy with its limits. Keep the BLS and BEA dates in view.

Next, inspect one current employer-title match in each place when an exact public place match exists. A job post can show work level, hours, location rules, and pay that the BLS row cannot. The post is dated employer evidence. It does not change the survey median or prove a broad trend.

Last, use your own facts. Compare the job needs with work you have done and can support. A wage gap cannot show fit. A price-level gap cannot show fit. A job count cannot show fit. MeritLog's résumé path starts only after you choose a listing and confirm the work facts you want to use.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-public-job-boundary-v1 · Rule: comparison-checklist · job-source-separation · confirmed-resume-evidence

Limits

What this Structural Metal Fabricators and Fitters comparison does not decide

The page does not choose Georgia or Maine for you. It does not say what one worker earns. It does not promise a job, offer, raise, or move result. It does not say why the medians differ. It does not turn the larger wage, job count, quotient, or proxy into a place score.

The comparison leaves out people who work for themselves and other work outside the OEWS scope. It does not add taxes, take-home pay, benefits, stock, bonus pay, hours, travel, remote work, or a household budget. Current listings are separate and can be empty even when the government rows are complete.

Use this page for a bounded choice. Compare the same May 2025 BLS role and metric across two exact areas. Add the separate 2024 BEA price view. Inspect dated employer-title matches. Then build a résumé from facts you have confirmed. Keep each source tied to the question it can answer.

Evidence: bls-oews-may-2025 · bea-rpp-2024 · meritlog-public-job-boundary-v1 · Rule: no-place-choice · no-personal-pay-claim · source-purpose-separation

Structural Metal Fabricators and Fitters: Georgia vs Maine

Same occupation, same annual wage metric

The winner can change when local prices differ

Housing and all-items indexes explain the adjustment

Equivalent nominal pay, using price levels only

Employment scale and local concentration

Compare another occupation or pair

Structural Metal Fabricators and Fitters: Georgia and Maine guide

Structural Metal Fabricators and Fitters in Georgia and Maine: common questions

Compare Structural Metal Fabricators and Fitters listings by place

Georgia

We could not load these listings.

Maine

We could not load these listings.

Current jobs

Tailor for a real Structural Metal Fabricators and Fitters job, not a generic wage number.

Structural Metal Fabricators and Fitters pay in Georgia and Maine

Compare the full Structural Metal Fabricators and Fitters wage ladder

Mean and median tell two parts of the Structural Metal Fabricators and Fitters story

How the two Structural Metal Fabricators and Fitters job bases differ

Where Structural Metal Fabricators and Fitters takes a larger share of jobs

How price levels differ between Georgia and Maine

Compare the medians in national-price dollars

What equal price-level pay would look like in the other place

Check the survey marks before you use the gap

A short check list for Georgia and Maine

What this Structural Metal Fabricators and Fitters comparison does not decide

Compare Structural Metal Fabricators and Fitters listings by place

Georgia

We could not load these listings.

Maine

We could not load these listings.

Privacy choices

Structural Metal Fabricators and Fitters: Georgia vs Maine

Same occupation, same annual wage metric

The winner can change when local prices differ

Housing and all-items indexes explain the adjustment

Equivalent nominal pay, using price levels only

Employment scale and local concentration

Compare another occupation or pair

Structural Metal Fabricators and Fitters: Georgia and Maine guide

Structural Metal Fabricators and Fitters in Georgia and Maine: common questions

Compare Structural Metal Fabricators and Fitters listings by place

Georgia

We could not load these listings.

Maine

We could not load these listings.

Current jobs

Tailor for a real Structural Metal Fabricators and Fitters job, not a generic wage number.

Structural Metal Fabricators and Fitters pay in Georgia and Maine

Compare the full Structural Metal Fabricators and Fitters wage ladder

Mean and median tell two parts of the Structural Metal Fabricators and Fitters story

How the two Structural Metal Fabricators and Fitters job bases differ

Where Structural Metal Fabricators and Fitters takes a larger share of jobs

How price levels differ between Georgia and Maine

Compare the medians in national-price dollars

What equal price-level pay would look like in the other place

Check the survey marks before you use the gap

A short check list for Georgia and Maine

What this Structural Metal Fabricators and Fitters comparison does not decide

Compare Structural Metal Fabricators and Fitters listings by place

Georgia

We could not load these listings.

Maine

We could not load these listings.