Alabama was 41.1% below the U.S. median for Layout Workers, Metal and Plastic. It ranked 19 of 20 state areas with a published annual median. Neither comparison adjusts for cost of living, benefits, experience, employer mix, or hours.
Price-level context
What the local median may buy
BEA's 2024 all-items price index for Alabama was 88.8, or 11.2% below the national price level. Its housing index was 61.8.
National-price-dollar proxy
$42,320
WageScope divides the published Layout Workers, Metal and Plastic median by the BEA all-items index. This is a price-level comparison, not take-home pay, a personal budget, or a quality-of-life score.
Layout Workers, Metal and Plastic in Alabama: wage guide
Use the local pay range, same-source bench marks, job scale, price level, and survey care marks as separate facts. This guide stays tied to SOC 51-4192 and BLS area 01.
Questions, answered
Layout Workers, Metal and Plastic pay in Alabama: common questions
What is the median wage for Layout Workers, Metal and Plastic in Alabama?
The May 2025 BLS OEWS release published a median of $37,590 per year for Layout Workers, Metal and Plastic in Alabama. This describes an occupation-area estimate, not a promised offer or an individual's pay.
Is Layout Workers, Metal and Plastic pay higher in Alabama than nationally?
Alabama's published median was 41.1% below the U.S. median for the same occupation and release.
Does the wage estimate adjust for cost of living in Alabama?
No. The BLS wage is nominal. WageScope separately shows BEA's 2024 all-items Regional Price Parity of 88.8 and a transparent national-price-dollar proxy.
How many Layout Workers, Metal and Plastic jobs does BLS estimate in Alabama?
From market data to your evidence
Tailor for a real Layout Workers, Metal and Plastic job, not a generic wage number.
Pick an eligible listing, then MeritLog can help you prepare from experience you have confirmed. WageScope never turns a BLS estimate into a qualification or résumé claim.
What the Layout Workers, Metal and Plastic median says in Alabama
The May 2025 BLS OEWS estimate puts the Layout Workers, Metal and Plastic median in Alabama at $37,590 per year. Median means the middle of the published wage spread. It is not one worker's pay. It is not a job offer. The row is tied to SOC 51-4192 and BLS area 01.
BLS lists 190 wage and salary jobs for this exact role-place row. That is a survey estimate. It is not a count of open posts. The local mean is $41,960 per year. Mean uses all wage values behind the estimate, so high or low values can move it away from the median.
Alabama's Layout Workers, Metal and Plastic median is 41.1% below the U.S. Layout Workers, Metal and Plastic median of $63,870 on the same published median. The comparison uses the same SOC code and source period. It does not add price levels, taxes, benefits, hours, or a person's work history.
This page exists because the BLS artifact has one row for SOC 51-4192 and area 01. SOC 51-4192 names Layout Workers, Metal and Plastic. Area 01 names Alabama. Both keys must match before WageScope can show or index this answer.
The 51-4192/01 row reports 190 wage and salary jobs, 0.09 jobs per 1,000 local jobs, and a 2.34 location quotient. Each value stays under the same two source keys.
For 51-4192/01, the annual median is $37,590 per year, while the matching mean is $41,960 per year. The row is published with annual and hourly fields. WageScope does not switch units to fill a blank.
BLS area 01 facts behind this Layout Workers, Metal and Plastic page
Area 01 reports 2,113,660 wage and salary jobs across all covered occupations. Its annual mean is $57,500. Its annual median is $45,670. The employment RSE is 0%. The mean-wage RSE is 0.3%. These are facts for the whole area. They do not replace the 51-4192 row.
The all-jobs wage ladder in Alabama runs from $26,090 at the 10th percentile to $101,250 at the 90th percentile. The 25th percentile is $32,050. The median is $45,670. The 75th percentile is $66,790. This is a place check, not a pay range for Layout Workers, Metal and Plastic.
The source rows below are the six largest detailed roles in the bounded area file. Each keeps its own SOC code. They help a reader spot-check area 01. They do not show related skills or a path into Layout Workers, Metal and Plastic.
1. Area 01, SOC 41-2031, Retail Salespersons: 60,880 jobs, $30,040 annual median, 28.81 jobs per 1,000, and 1.15 location quotient.
2. Area 01, SOC 29-1141, Registered Nurses: 54,340 jobs, $77,080 annual median, 25.71 jobs per 1,000, and 1.18 location quotient.
3. Area 01, SOC 51-2090, Miscellaneous Assemblers and Fabricators: 53,280 jobs, $42,700 annual median, 25.21 jobs per 1,000, and 2.79 location quotient.
Pay range
Read the Alabama wage ladder for Layout Workers, Metal and Plastic
The 10th percentile is $29,100 per year. The 25th percentile is $29,120 per year. The median is $37,590 per year. The 75th percentile is $58,550 per year. The 90th percentile is $60,930 per year.
A percentile is a rank point, not a career stage. The 10th percentile does not mean new-worker pay. The 90th percentile does not mean a wage that comes after a set number of years. The points show how the wage values spread in the source. They do not say why one job sits at one point.
The middle half runs from $29,120 per year to $58,550 per year. The 10th-to-90th span is $31,830. Use the full ladder when a job post sits far from the median.
Alabama has a annual median of $37,590 per year. No exact state row is linked for this area. The U.S. row has $63,870 per year. WageScope keeps annual and hourly values apart.
A state comparison is not available for Alabama. Alabama is 41.1% below the United States on the same published median. A gap can reflect many things that are not in this row. WageScope reports the gap but does not name a cause.
The state and U.S. rows are bench marks, not replacements. They do not fill missing local facts. A state can hold many local labor markets. A national row can hold many states. Read the local row first, then use the broader rows to see scale.
Where Alabama sits for Layout Workers, Metal and Plastic
Alabama ranks 19 of 20 among states and territories with a published annual median for Layout Workers, Metal and Plastic. The list keeps one SOC code, one map type, one wage metric, and one BLS release. It skips rows without the matching median.
Rank 19 of 20 is not a place score. A small wage gap can move a row several spots. The rank does not add local prices, job count, concentration, commute, taxes, or work rules. Use it only to find where the published median falls inside this like-for-like set.
The nearby rows below are the closest ranks, not chosen cities. Their pay, job counts, and local shares can differ. Open a peer page before making a deeper comparison. A title and one number are not enough for a move or pay choice.
16. Tennessee has a Layout Workers, Metal and Plastic median of $43,250 per year, 40 estimated jobs, and a location quotient of 0.29.
17. South Carolina has a Layout Workers, Metal and Plastic median of $41,650 per year, 40 estimated jobs, and a location quotient of 0.45.
18. New Mexico has a Layout Workers, Metal and Plastic median of $38,560 per year, 60 estimated jobs, and a location quotient of 1.82.
20. Puerto Rico has a Layout Workers, Metal and Plastic median of $25,170 per year, 110 estimated jobs, and a location quotient of 3.16.
Pay leaders
Where Layout Workers, Metal and Plastic medians lead among states and territories
The rows below use the same SOC 51-4192, the same annual median, the same May 2025 BLS release, and the same state map type. Hawaii has the highest published median in this set, at $87,570 per year. Alabama sits at $37,590 per year.
A pay lead is one fact. It does not show the size of the job base. It does not show how common Layout Workers, Metal and Plastic is in the local mix. It also does not add local prices. The bullets keep the median, job count, and location quotient together so a high wage is not read as a full market score.
Use this list to choose a deeper pair, not to choose a place. Open the two local pages. Check the full wage ladder, the job scale, the survey care marks, and the exact BEA price row when present. A missing median stays out of this rank instead of becoming zero.
1. Hawaii has a Layout Workers, Metal and Plastic median of $87,570 per year, or $49,980 above Alabama. BLS lists 140 jobs there, compared with 190 in Alabama. The location quotient is 5.81.
2. Washington has a Layout Workers, Metal and Plastic median of $85,300 per year, or $47,710 above Alabama. BLS lists 500 jobs there, compared with 190 in Alabama. The location quotient is 3.64.
Job-base leaders
Where BLS counts the most Layout Workers, Metal and Plastic jobs
Virginia has the largest published state job estimate for Layout Workers, Metal and Plastic in this same-source set, at 1,080 jobs. Alabama has 190. The count shows covered job scale, not open posts.
A large job base can have a lower median than a smaller one. It can also have a location quotient near or below 1. That is why WageScope does not blend job count, pay, and local share. Each field keeps its name and unit. The rows below let you compare all three without making one score.
Current MeritLog listings can add a dated view of employer-title matches. They do not change this May 2025 order. A place with few current cards can still have a large BLS job estimate. A place with several cards can still have a smaller estimate. The sources use different clocks and scopes.
1. Virginia has 1,080 estimated Layout Workers, Metal and Plastic jobs, a gap of 890 jobs from Alabama. Its median is $70,260 per year, or $32,670 above Alabama. Its location quotient is 6.83.
2. Kansas has 610 estimated Layout Workers, Metal and Plastic jobs, a gap of 420 jobs from Alabama. Its median is $79,240 per year, or $41,650 above Alabama. Its location quotient is 11.11.
Local-share leaders
Where Layout Workers, Metal and Plastic takes the largest share of local jobs
Kansas has the highest published location quotient in this state set, at 11.11. Alabama has 2.34. A value above 1 means the role's local job share is larger than its national share.
A high quotient can come from a small local job base. It does not prove more jobs, more posts, faster growth, or higher pay. The bullets keep each quotient beside its BLS job count and median. This lets a reader see when the three measures point in different ways.
Use this list to ask where Layout Workers, Metal and Plastic is a large part of the local mix. Use the employment list to ask where BLS counts the most jobs. Use the pay list to ask where the median is highest. None of those lists decides where a person should work.
1. Kansas has a location quotient of 11.11, a gap of 8.77 from Alabama. BLS lists 610 Layout Workers, Metal and Plastic jobs and a median of $79,240 per year, or $41,650 above Alabama.
2. Maine has a location quotient of 7.32, a gap of 4.98 from Alabama. BLS lists 180 Layout Workers, Metal and Plastic jobs and a median of $74,530 per year, or $36,940 above Alabama.
3. Virginia has a location quotient of 6.83, a gap of 4.49 from Alabama. BLS lists 1,080 Layout Workers, Metal and Plastic jobs and a median of $70,260 per year, or $32,670 above Alabama.
Job scale and share
How common Layout Workers, Metal and Plastic is in Alabama
BLS lists 190 Layout Workers, Metal and Plastic jobs in Alabama. It also lists 0.09 jobs per 1,000 local jobs. Jobs per 1,000 turns the count into a rate. It helps compare places of different size. It does not show open posts or hiring speed.
The location quotient is 2.34. A value of 1 means Layout Workers, Metal and Plastic has the same share of local jobs as it has across the nation. This row is higher than 1. The quotient is a share check, not a wage or a growth measure.
Read the three values as separate facts. Employment asks how many covered jobs BLS estimated. Jobs per 1,000 asks how much of the local job base the role takes. Location quotient asks how that share compares with the national share. None of them tells you how many posts are open today.
Layout Workers, Metal and Plastic beside other roles in Alabama
The all-occupations median in Alabama is $45,670 per year. The Layout Workers, Metal and Plastic median is $37,590 per year. Layout Workers, Metal and Plastic is 17.7% below the local all-occupations median on the same published median. This compares one role with the full covered job mix.
The nearby role medians below come from the bounded detailed-role table for Alabama. They are close by wage, not by task. A small wage gap does not mean two jobs need the same skill or lead to the same career. Official titles keep their own SOC codes and source rows.
Use the list to spot the local wage mix around Layout Workers, Metal and Plastic. Then open the role page you mean. A role can have a similar median and a very different job count or local share. The pay number alone cannot show fit, demand, or a path between jobs.
1. First-Line Supervisors of Food Preparation and Serving Workers, SOC 35-1012, has a Alabama median of $37,110 per year. BLS lists 19,180 jobs and a location quotient of 1.15.
2. Medical Secretaries and Administrative Assistants, SOC 43-6013, has a Alabama median of $36,930 per year. BLS lists 16,580 jobs and a location quotient of 1.27.
3. Construction Laborers, SOC 47-2061, has a Alabama median of $36,900 per year. BLS lists 18,400 jobs and a location quotient of 1.23.
Area job mix
The largest detailed roles in Alabama
Retail Salespersons is the largest detailed occupation in the bounded Alabama table, at 60,880 jobs. Layout Workers, Metal and Plastic has 190 jobs in its exact role-place row. The two counts show where this role sits beside other large parts of the local job base.
The all-occupations job count is 2,113,660. The detailed list below is only a bounded view of that larger mix. It does not sum to every local job. It does not include a blank role as zero. It helps explain why one role's wage and job count should not stand in for the whole area.
A large role can have a lower median. A smaller role can have a higher one. Job count does not show current posts, job quality, or growth. Use the list to see local scale. Then keep Layout Workers, Metal and Plastic's own median, spread, and share in their own fields.
1. Retail Salespersons has 60,880 jobs in Alabama, a gap of 60,690 from Layout Workers, Metal and Plastic. Its median is $30,040 per year, or $7,550 below Layout Workers, Metal and Plastic. Its location quotient is 1.15.
2. Registered Nurses has 54,340 jobs in Alabama, a gap of 54,150 from Layout Workers, Metal and Plastic. Its median is $77,080 per year, or $39,490 above Layout Workers, Metal and Plastic. Its location quotient is 1.18.
Area pay mix
Published role medians around Alabama
Software Developers has the highest published median in the bounded Alabama role table, at $122,540 per year. Layout Workers, Metal and Plastic has $37,590 per year. This puts the role beside a local pay range without blending the source rows.
The local all-occupations median is $45,670 per year. A role above that mark is not better. A role below it is not worse. The mark only shows where the role's published median sits against the full covered job mix. Job tasks, level, hours, and work setting are separate facts.
The bullets keep each SOC title, job count, median, and local share together. Use them to find a role page worth opening. Do not use a close median as proof that two roles share skills or that one is a path to the other.
1. Software Developers has a median of $122,540 per year in Alabama, or $84,950 above Layout Workers, Metal and Plastic. BLS lists 17,450 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 0.76.
2. General and Operations Managers has a median of $111,790 per year in Alabama, or $74,200 above Layout Workers, Metal and Plastic. BLS lists 30,170 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 0.63.
Area role shares
Roles with the largest local share in Alabama
Cooks, Fast Food has the highest location quotient in the bounded Alabama role table, at 3.07. Layout Workers, Metal and Plastic has 2.34. Both values compare a local job share with the matching national share.
A quotient above 1 means the role takes a larger share of local jobs than it does across the nation. It does not mean more jobs than every other role. It does not mean open posts, growth, or high pay. The job count and median beside each row answer those other narrow questions.
The local role-share mix can differ a lot from the pay mix. Read both lists. Then compare Layout Workers, Metal and Plastic with the same SOC code in another place. This keeps a broad area pattern from replacing the exact role-place row.
1. Cooks, Fast Food has a location quotient of 3.07 in Alabama, a gap of 0.73 from Layout Workers, Metal and Plastic. BLS lists 26,740 jobs and a median of $27,870 per year, or $9,720 below Layout Workers, Metal and Plastic.
2. Industrial Machinery Mechanics has a location quotient of 2.99 in Alabama, a gap of 0.65 from Layout Workers, Metal and Plastic. BLS lists 17,850 jobs and a median of $61,920 per year, or $24,330 above Layout Workers, Metal and Plastic.
Price-level view
What $37,590 may mean after the Alabama price level
BEA's 2024 all-items price index for Alabama is 88.8. The U.S. level is 100. The local level is 11.2% below that mark. This is a broad price comparison. It is not a personal budget.
WageScope divides the $37,590 Layout Workers, Metal and Plastic median by 88.8 divided by 100. The result is $42,320 in national-price dollars per year. This proxy keeps the math clear. It is not take-home pay and does not set a move target.
Housing is 61.8. Goods are 96.4. Utilities are 84.6. Other services are 96.7. The parts do not move as one. WageScope uses BEA's all-items index for the proxy and does not make its own basket.
The employment RSE for this Layout Workers, Metal and Plastic row is 13.3%. The mean-wage RSE is 4%. RSE means relative standard error. It is a survey precision flag. A smaller value often means less sampling uncertainty. It is not the chance that one person's pay is right or wrong.
The employment RSE belongs to the 190 job estimate. The mean-wage RSE belongs to the $41,960 mean. BLS does not give the same RSE field for the median or every percentile. WageScope does not move an RSE from one field to another.
A local row can change in a new release. A small role-place sample can also have more survey uncertainty than a broad national row. Keep the May 2025 date next to the value. Do not mix a newer job post with the BLS date as if both facts came from one clock.
The job block looks for strict employer-title matches to Layout Workers, Metal and Plastic. It uses a Alabama place filter only when the public place list has an exact approved match. If that match is not safe, the page says the jobs are not narrowed to this place. A false negative is safer than showing a different role.
Each card keeps its employer, place, source, and seen date. Listings can change between visits while the survey figures stay tied to their release date. A listing range does not replace the $37,590 BLS median. The listing and survey answer different questions.
Open one listing. Check its level, work place, pay range, and needs. Then tailor with work facts you can support. Do not turn a wage, job count, rank, or price proxy into a résumé claim. The public page is read only. It does not save a job or start a draft on load.
What the Layout Workers, Metal and Plastic row for Alabama does not claim
The row does not say what one person earns. It does not promise a job, offer, raise, or move result. It does not say why the local median differs from the U.S. row. It does not add tips, bonus pay, stock, benefits, taxes, or work hours unless those items are in the BLS wage measure.
The 190 job estimate is not a live opening count. The location quotient of 2.34 is not a growth score. Rank 19 of 20 is not a place score. The 88.8 price index is not a personal budget.
Use the row for one clear task. Read the May 2025 wage spread for SOC 51-4192 in BLS area 01. Compare the same metric with the state and U.S. rows. Add the separate 2024 price level when present. Inspect a dated job match. Then use confirmed work facts for a résumé.
BLS published an employment estimate of 190 wage and salary jobs for this exact row. It is a survey estimate, not a current opening count or forecast.
Are the current job listings included in the BLS wage calculation?
No. MeritLog shows eligible live public-catalog listings separately, with their own source and observation date. Posted pay never changes the official BLS distribution.
4. Area 01, SOC 53-7065, Stockers and Order Fillers: 46,580 jobs, $34,290 annual median, 22.04 jobs per 1,000, and 1.21 location quotient.
5. Area 01, SOC 41-2011, Cashiers: 46,420 jobs, $28,250 annual median, 21.96 jobs per 1,000, and 1.11 location quotient.
6. Area 01, SOC 43-6014, Secretaries and Administrative Assistants, Except Legal, Medical, and Executive: 45,050 jobs, $41,630 annual median, 21.31 jobs per 1,000, and 1.94 location quotient.
3. Kansas has a Layout Workers, Metal and Plastic median of $79,240 per year, or $41,650 above Alabama. BLS lists 610 jobs there, compared with 190 in Alabama. The location quotient is 11.11.
4. Oregon has a Layout Workers, Metal and Plastic median of $75,020 per year, or $37,430 above Alabama. BLS lists Not published jobs there, compared with 190 in Alabama. The location quotient is Not published.
5. Maine has a Layout Workers, Metal and Plastic median of $74,530 per year, or $36,940 above Alabama. BLS lists 180 jobs there, compared with 190 in Alabama. The location quotient is 7.32.
6. California has a Layout Workers, Metal and Plastic median of $74,490 per year, or $36,900 above Alabama. BLS lists 480 jobs there, compared with 190 in Alabama. The location quotient is 0.68.
7. Virginia has a Layout Workers, Metal and Plastic median of $70,260 per year, or $32,670 above Alabama. BLS lists 1,080 jobs there, compared with 190 in Alabama. The location quotient is 6.83.
8. Massachusetts has a Layout Workers, Metal and Plastic median of $63,880 per year, or $26,290 above Alabama. BLS lists 90 jobs there, compared with 190 in Alabama. The location quotient is 0.67.
3. Washington has 500 estimated Layout Workers, Metal and Plastic jobs, a gap of 310 jobs from Alabama. Its median is $85,300 per year, or $47,710 above Alabama. Its location quotient is 3.64.
4. California has 480 estimated Layout Workers, Metal and Plastic jobs, a gap of 290 jobs from Alabama. Its median is $74,490 per year, or $36,900 above Alabama. Its location quotient is 0.68.
5. Florida has 200 estimated Layout Workers, Metal and Plastic jobs, a gap of 10 jobs from Alabama. Its median is $58,170 per year, or $20,580 above Alabama. Its location quotient is 0.53.
6. Alabama has 190 estimated Layout Workers, Metal and Plastic jobs, a gap of 0 jobs from Alabama. Its median is $37,590 per year, or $0 above Alabama. Its location quotient is 2.34.
7. Texas has 190 estimated Layout Workers, Metal and Plastic jobs, a gap of 0 jobs from Alabama. Its median is $48,220 per year, or $10,630 above Alabama. Its location quotient is 0.35.
8. Maine has 180 estimated Layout Workers, Metal and Plastic jobs, a gap of 10 jobs from Alabama. Its median is $74,530 per year, or $36,940 above Alabama. Its location quotient is 7.32.
4. Hawaii has a location quotient of 5.81, a gap of 3.47 from Alabama. BLS lists 140 Layout Workers, Metal and Plastic jobs and a median of $87,570 per year, or $49,980 above Alabama.
5. Washington has a location quotient of 3.64, a gap of 1.30 from Alabama. BLS lists 500 Layout Workers, Metal and Plastic jobs and a median of $85,300 per year, or $47,710 above Alabama.
6. Puerto Rico has a location quotient of 3.16, a gap of 0.82 from Alabama. BLS lists 110 Layout Workers, Metal and Plastic jobs and a median of $25,170 per year, or $12,420 below Alabama.
7. Alabama has a location quotient of 2.34, a gap of 0.00 from Alabama. BLS lists 190 Layout Workers, Metal and Plastic jobs and a median of $37,590 per year, or $0 above Alabama.
8. New Mexico has a location quotient of 1.82, a gap of 0.52 from Alabama. BLS lists 60 Layout Workers, Metal and Plastic jobs and a median of $38,560 per year, or $970 above Alabama.
4. Customer Service Representatives, SOC 43-4051, has a Alabama median of $38,400 per year. BLS lists 33,290 jobs and a location quotient of 0.94.
5. Laborers and Freight, Stock, and Material Movers, Hand, SOC 53-7062, has a Alabama median of $36,670 per year. BLS lists 36,140 jobs and a location quotient of 0.9.
6. Stockers and Order Fillers, SOC 53-7065, has a Alabama median of $34,290 per year. BLS lists 46,580 jobs and a location quotient of 1.21.
7. Nursing Assistants, SOC 31-1131, has a Alabama median of $34,140 per year. BLS lists 25,250 jobs and a location quotient of 1.28.
8. Secretaries and Administrative Assistants, Except Legal, Medical, and Executive, SOC 43-6014, has a Alabama median of $41,630 per year. BLS lists 45,050 jobs and a location quotient of 1.94.
3. Miscellaneous Assemblers and Fabricators has 53,280 jobs in Alabama, a gap of 53,090 from Layout Workers, Metal and Plastic. Its median is $42,700 per year, or $5,110 above Layout Workers, Metal and Plastic. Its location quotient is 2.79.
4. Stockers and Order Fillers has 46,580 jobs in Alabama, a gap of 46,390 from Layout Workers, Metal and Plastic. Its median is $34,290 per year, or $3,300 below Layout Workers, Metal and Plastic. Its location quotient is 1.21.
5. Cashiers has 46,420 jobs in Alabama, a gap of 46,230 from Layout Workers, Metal and Plastic. Its median is $28,250 per year, or $9,340 below Layout Workers, Metal and Plastic. Its location quotient is 1.11.
6. Secretaries and Administrative Assistants, Except Legal, Medical, and Executive has 45,050 jobs in Alabama, a gap of 44,860 from Layout Workers, Metal and Plastic. Its median is $41,630 per year, or $4,040 above Layout Workers, Metal and Plastic. Its location quotient is 1.94.
7. Fast Food and Counter Workers has 41,460 jobs in Alabama, a gap of 41,270 from Layout Workers, Metal and Plastic. Its median is $23,700 per year, or $13,890 below Layout Workers, Metal and Plastic. Its location quotient is 0.79.
8. Heavy and Tractor-Trailer Truck Drivers has 36,650 jobs in Alabama, a gap of 36,460 from Layout Workers, Metal and Plastic. Its median is $52,120 per year, or $14,530 above Layout Workers, Metal and Plastic. Its location quotient is 1.31.
3. Registered Nurses has a median of $77,080 per year in Alabama, or $39,490 above Layout Workers, Metal and Plastic. BLS lists 54,340 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 1.18.
4. Accountants and Auditors has a median of $74,880 per year in Alabama, or $37,290 above Layout Workers, Metal and Plastic. BLS lists 24,300 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 1.23.
5. First-Line Supervisors of Production and Operating Workers has a median of $73,060 per year in Alabama, or $35,470 above Layout Workers, Metal and Plastic. BLS lists 20,670 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 2.26.
6. Sales Representatives, Wholesale and Manufacturing, Except Technical and Scientific Products has a median of $64,140 per year in Alabama, or $26,550 above Layout Workers, Metal and Plastic. BLS lists 20,470 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 1.22.
7. Industrial Machinery Mechanics has a median of $61,920 per year in Alabama, or $24,330 above Layout Workers, Metal and Plastic. BLS lists 17,850 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 2.99.
8. Elementary School Teachers, Except Special Education has a median of $61,380 per year in Alabama, or $23,790 above Layout Workers, Metal and Plastic. BLS lists 22,030 jobs, compared with 190 for Layout Workers, Metal and Plastic. Its location quotient is 1.17.
3. Miscellaneous Assemblers and Fabricators has a location quotient of 2.79 in Alabama, a gap of 0.45 from Layout Workers, Metal and Plastic. BLS lists 53,280 jobs and a median of $42,700 per year, or $5,110 above Layout Workers, Metal and Plastic.
4. First-Line Supervisors of Production and Operating Workers has a location quotient of 2.26 in Alabama, a gap of 0.08 from Layout Workers, Metal and Plastic. BLS lists 20,670 jobs and a median of $73,060 per year, or $35,470 above Layout Workers, Metal and Plastic.
5. Secretaries and Administrative Assistants, Except Legal, Medical, and Executive has a location quotient of 1.94 in Alabama, a gap of 0.40 from Layout Workers, Metal and Plastic. BLS lists 45,050 jobs and a median of $41,630 per year, or $4,040 above Layout Workers, Metal and Plastic.
6. First-Line Supervisors of Retail Sales Workers has a location quotient of 1.64 in Alabama, a gap of 0.70 from Layout Workers, Metal and Plastic. BLS lists 25,020 jobs and a median of $44,860 per year, or $7,270 above Layout Workers, Metal and Plastic.
7. Food Preparation Workers has a location quotient of 1.46 in Alabama, a gap of 0.88 from Layout Workers, Metal and Plastic. BLS lists 17,680 jobs and a median of $27,930 per year, or $9,660 below Layout Workers, Metal and Plastic.
8. Heavy and Tractor-Trailer Truck Drivers has a location quotient of 1.31 in Alabama, a gap of 1.03 from Layout Workers, Metal and Plastic. BLS lists 36,650 jobs and a median of $52,120 per year, or $14,530 above Layout Workers, Metal and Plastic.
Layout Workers, Metal and Plastic pay in Alabama | BLS 2025
Current jobs
Precise employer-title matches for Layout Workers, Metal and Plastic in Alabama
Filtered through MeritLog's approved Alabama place record and a strict employer-title rule. Listings are not classified by BLS and remain separate from BLS and BEA estimates.
