How much do tool and die makers make?

What the national Tool and Die Makers median says

The May 2025 BLS OEWS estimate puts the U.S. median for Tool and Die Makers at $64,050 per year. Median means the middle. Half of the wage values used for this estimate fall below that point. Half fall above it. The median is not one worker's pay. It is not a job offer. It is one clear mark for the middle of a broad national pay range.

BLS also lists 56,930 wage and salary jobs for Tool and Die Makers. That count covers jobs in the survey's scope. It does not count open job ads. It also leaves out people who work for themselves. The wage and job counts share the same May 2025 reference point, so they can be read together without mixing time periods.

The Tool and Die Makers mean of $66,860 per year is 4.4% above the $64,050 median on the same published median. Mean means BLS adds the wage values and divides the total by the number of jobs behind the estimate. A gap between mean and median shows that the shape is not even. It does not explain the cause of the gap.

The fields that make SOC 51-4111 its own page

BLS names this record Tool and Die Makers and gives it SOC 51-4111. The two-part code is the stable key for this page. A role with a close name keeps a different code, wage row, job count, and area pattern. WageScope never joins two SOC records because their words sound alike.

For SOC 51-4111, the U.S. row reports 56,930 wage and salary jobs. Its annual median is $64,050 per year. Its matching mean is $66,860 per year. These facts come from one national row and one May 2025 release.

SOC 51-4111 appears in 46 state or territory rows. It also has 167 metro rows and 63 nonmetro rows. A missing local row stays missing. We do not fill it with U.S. data or data for a similar job code.

• SOC 51-4111 10th percentile: $44,680 per year.
• SOC 51-4111 25th percentile: $51,490 per year.
• SOC 51-4111 median: $64,050 per year.
• SOC 51-4111 75th percentile: $78,770 per year.
• SOC 51-4111 90th percentile: $92,680 per year.
• SOC 51-4111 employment RSE: 1.9%. Mean-wage RSE: 0.4%.
• SOC 51-4111 has no national suppression mark in the fields shown on this page.

Read the Tool and Die Makers wage ladder from low to high

The 10th percentile is $44,680 per year. The 25th percentile is $51,490 per year. The median is $64,050 per year. The 75th percentile is $78,770 per year. The 90th percentile is $92,680 per year. Each point marks a place in the same national wage spread.

A percentile is a rank point. It is not a career step. For example, the 10th percentile means 10% of wage values are at or below that mark. It does not mean a new worker starts there. The 90th percentile means 90% are at or below that mark. It does not mean a worker can reach it after a set number of years.

The middle half runs from $51,490 to $78,770 per year. That span is $27,280. The full 10th-to-90th span is $48,000. These spans show why one median cannot stand in for every Tool and Die Makers job.

What the gaps around the Tool and Die Makers median show

The median is 43.4% above the 10th percentile. The 90th percentile is 44.7% above the median. The two sides do not have to match. A wider upper side can pull the mean up. A wider lower side can pull it down. The data shows the shape, but not the reason for that shape.

The 25th-to-median step is $12,560 per year. The median-to-75th step is $14,720 per year. These two steps give a closer look at the middle half. They are often more useful than a single top-to-bottom gap because they keep the center in view.

Use this ladder as a fact check when you read a job post. A posted range can sit below, near, or above these BLS marks. That does not make the post wrong. A job may differ by place, hours, level, field, employer, or work rules. Keep the posted range tied to that listing. Keep the BLS range tied to the whole occupation.

Metro areas with the highest published Tool and Die Makers medians

WageScope found 166 metro rows with the same published annual median for Tool and Die Makers. It sorts only those rows. It does not fill a blank row. It does not turn a blank into zero. The first six rows below have the highest published medians in this release. The list is a wage rank, not a rank of places to live or work.

The first row is Seattle-Tacoma-Bellevue, WA, at $116,850 per year. The middle metro row by published pay is Corpus Christi, TX, at $63,890 per year. That middle metro mark gives one more check on how far the top rows sit from a common place in the set.

These are nominal wages. Nominal means the dollar amount shown in the source. This list does not adjust for local price levels. It also does not tell us how many openings an area has now. Use a local page to see price-level context when an exact BEA row exists. Use the separate job block to inspect current employer-title matches.

• 1. Seattle-Tacoma-Bellevue, WA has a Tool and Die Makers median of $116,850 per year, or $52,800 above the U.S. Tool and Die Makers median. BLS lists 1,090 jobs there, against 56,930 across the U.S. The local location quotient is 1.42.
• 2. San Francisco-Oakland-Fremont, CA has a Tool and Die Makers median of $97,560 per year, or $33,510 above the U.S. Tool and Die Makers median. BLS lists 130 jobs there, against 56,930 across the U.S. The local location quotient is 0.15.
• 3. Albany-Schenectady-Troy, NY has a Tool and Die Makers median of $87,240 per year, or $23,190 above the U.S. Tool and Die Makers median. BLS lists 60 jobs there, against 56,930 across the U.S. The local location quotient is 0.35.
• 4. Kansas City, MO-KS has a Tool and Die Makers median of $85,740 per year, or $21,690 above the U.S. Tool and Die Makers median. BLS lists 450 jobs there, against 56,930 across the U.S. The local location quotient is 1.12.
• 5. San Diego-Chula Vista-Carlsbad, CA has a Tool and Die Makers median of $85,010 per year, or $20,960 above the U.S. Tool and Die Makers median. BLS lists 100 jobs there, against 56,930 across the U.S. The local location quotient is 0.18.
• 6. Lima, OH has a Tool and Die Makers median of $84,730 per year, or $20,680 above the U.S. Tool and Die Makers median. BLS lists 70 jobs there, against 56,930 across the U.S. The local location quotient is 3.61.

Metro areas with the largest Tool and Die Makers job estimates

A large wage can appear in a small job market. A large job market can have a lower wage. That is why WageScope keeps pay and job count in separate views. The six rows below have the largest published employment estimates for Tool and Die Makers among metro rows in this release. Employment means the number of wage and salary jobs in scope. It does not mean open roles.

Detroit-Warren-Dearborn, MI has the largest listed metro estimate in this set, at 4,900 jobs. Its median is $73,120 per year. Compare that with Seattle-Tacoma-Bellevue, WA, which leads the published median list. The leaders may match, or they may not. Each list answers a different question.

Job count can help you see the scale of a local labor market. It cannot show churn, new hiring, job quality, remote work, or the chance that one person will get hired. Current listings add a second view, but they are a dated sample of posts. WageScope never turns the listing count into a demand score.

• 1. Detroit-Warren-Dearborn, MI has 4,900 estimated Tool and Die Makers jobs. That is 8.6% of the U.S. estimate of 56,930 jobs. Its median is $73,120 per year, or $9,070 above the U.S. Tool and Die Makers median. Its location quotient is 7.03.
• 2. Chicago-Naperville-Elgin, IL-IN has 3,750 estimated Tool and Die Makers jobs. That is 6.6% of the U.S. estimate of 56,930 jobs. Its median is $61,180 per year, or $2,870 below the U.S. Tool and Die Makers median. Its location quotient is 2.27.
• 3. Grand Rapids-Wyoming-Kentwood, MI has 1,540 estimated Tool and Die Makers jobs. That is 2.7% of the U.S. estimate of 56,930 jobs. Its median is $64,650 per year, or $600 above the U.S. Tool and Die Makers median. Its location quotient is 7.01.
• 4. Cleveland, OH has 1,280 estimated Tool and Die Makers jobs. That is 2.2% of the U.S. estimate of 56,930 jobs. Its median is $64,070 per year, or $20 above the U.S. Tool and Die Makers median. Its location quotient is 3.4.
• 5. Seattle-Tacoma-Bellevue, WA has 1,090 estimated Tool and Die Makers jobs. That is 1.9% of the U.S. estimate of 56,930 jobs. Its median is $116,850 per year, or $52,800 above the U.S. Tool and Die Makers median. Its location quotient is 1.42.
• 6. Los Angeles-Long Beach-Anaheim, CA has 950 estimated Tool and Die Makers jobs. That is 1.7% of the U.S. estimate of 56,930 jobs. Its median is $78,020 per year, or $13,970 above the U.S. Tool and Die Makers median. Its location quotient is 0.41.

Where Tool and Die Makers has a larger share of local jobs

Location quotient is a share check. A value of 1 means the role has the same share of local jobs as it has across the nation. A value above 1 means the local share is larger. A value below 1 means the local share is smaller. It is not a count. It is not a wage. It does not say that a place is growing.

Morristown, TN has the highest published location quotient in this bounded metro set, at 10.47. The same row lists 180 jobs and a median of $48,400 per year. Reading all three values keeps a high share from being mistaken for a large market or high pay.

A small area can have a high location quotient because the role makes up a large part of a small local job base. A large area can have many workers and a lower quotient. Use the quotient to ask where the role is common in the mix. Use employment to ask how many jobs BLS estimated. Use the wage fields to ask what the published pay range looks like.

• 1. Morristown, TN has a Tool and Die Makers location quotient of 10.47. BLS lists 180 jobs and a median of $48,400 per year, or $15,650 below the U.S. Tool and Die Makers median. The U.S. job estimate is 56,930.
• 2. Sheboygan, WI has a Tool and Die Makers location quotient of 10.11. BLS lists 220 jobs and a median of $75,490 per year, or $11,440 above the U.S. Tool and Die Makers median. The U.S. job estimate is 56,930.
• 3. Columbus, IN has a Tool and Die Makers location quotient of 9.65. BLS lists 180 jobs and a median of $71,180 per year, or $7,130 above the U.S. Tool and Die Makers median. The U.S. job estimate is 56,930.
• 4. Waterbury-Shelton, CT has a Tool and Die Makers location quotient of 9.39. BLS lists 550 jobs and a median of $76,420 per year, or $12,370 above the U.S. Tool and Die Makers median. The U.S. job estimate is 56,930.
• 5. Jackson, MI has a Tool and Die Makers location quotient of 8.74. BLS lists 180 jobs and a median of $63,410 per year, or $640 below the U.S. Tool and Die Makers median. The U.S. job estimate is 56,930.
• 6. Saginaw, MI has a Tool and Die Makers location quotient of 8.47. BLS lists 250 jobs and a median of $71,910 per year, or $7,860 above the U.S. Tool and Die Makers median. The U.S. job estimate is 56,930.

How Tool and Die Makers sits in Production

Tool and Die Makers is SOC 51-4111. BLS places it in the Production major group. Among 105 detailed roles in that group with a published annual median, Tool and Die Makers ranks 11 of 105 by median. This is a pay rank inside one source family. It is not a rank of skill, value, status, or career fit.

The closest same-family medians help set a fair peer frame. They do not claim that the work is the same. Official SOC titles can cover different tasks and settings. WageScope uses the family only because BLS publishes that link. It does not infer a career move, a skill match, or a hiring path from the wage gap.

Use these peer rows to spot whether the $64,050 median sits near many family roles or far from them. Then open a role's own page before using its number. Each role has a different code, job count, wage spread, and place pattern. One family label does not erase those facts.

• 1. Layout Workers, Metal and Plastic, SOC 51-4192, has a U.S. median of $63,870 per year. Its gap from Tool and Die Makers is $180 per year.
• 2. Model Makers, Metal and Plastic, SOC 51-4061, has a U.S. median of $63,340 per year. Its gap from Tool and Die Makers is $710 per year.
• 3. Fabric and Apparel Patternmakers, SOC 51-6092, has a U.S. median of $62,750 per year. Its gap from Tool and Die Makers is $1,300 per year.
• 4. Aircraft Structure, Surfaces, Rigging, and Systems Assemblers, SOC 51-2011, has a U.S. median of $65,380 per year. Its gap from Tool and Die Makers is $1,330 per year.
• 5. Timing Device Assemblers and Adjusters, SOC 51-2061, has a U.S. median of $62,620 per year. Its gap from Tool and Die Makers is $1,430 per year.
• 6. Plant and System Operators, All Other, SOC 51-8099, has a U.S. median of $62,470 per year. Its gap from Tool and Die Makers is $1,580 per year.

How much care to use with the Tool and Die Makers estimate

The relative standard error for the job count is 1.9%. For the mean wage it is 0.4%. This measure, called RSE, shows survey precision. A smaller RSE often means less uncertainty from the sample. It does not tell you whether one person's pay is right or wrong.

The employment RSE applies to the 56,930 job estimate. The mean-wage RSE applies to the published mean of $66,860 per year. These fields do not give a matching RSE for the median or each percentile. WageScope shows the fields BLS published and does not move one RSE to another measure.

Survey values can change when BLS changes its methods, sample, models, or source year. That is why we show May 2025 on this page. Before we use a new release, we check its files, rows, and pages. A changed number is only a correction if the source calls it one.

A simple way to compare Tool and Die Makers across places

First, compare the same wage metric. Use annual with annual or hourly with hourly. Next, check the source date. Keep May 2025 BLS rows together. Then read employment and location quotient beside pay. This stops a high median from standing in for market size or local share. Last, add BEA price-level context only when the exact place has an approved row.

A state, metro, and nonmetro area are not the same kind of map. Do not rank them in one list without saying so. WageScope groups like with like. It also keeps a national row as a broad bench mark. A local page can show the local row, its state row when that link is exact, and the U.S. row without blending them.

If a value is blank, keep it blank. If BLS marks a top code, read it as a lower bound. Do not fill a blank from a nearby place. Do not turn a wage gap into a claim about taxes, hours, benefits, work rules, or a household budget. Those facts are not in the OEWS row.

Move from Tool and Die Makers wage data to one real listing

The job block on this page uses a strict employer-title match for Tool and Die Makers. It may show fewer rows than the full MeritLog job search. That is on purpose. A false negative is safer here than a job card for a different role. Each card keeps its employer, place, source, and seen date. The cards do not change the BLS wage data.

Open one listing and read its own pay, work place, level, and needs. Compare its posted range with the BLS spread only as context. A posted range is set by an employer for one role. The BLS range is a survey view across many jobs. Neither source proves that a person is fit for the work.

When you tailor a résumé, use work facts you can back up. Do not turn $64,050 into a skill or result. Do not copy a BLS job count into your work history. MeritLog can help shape confirmed experience for a chosen listing. The wage page stays public and read only. It does not save a job or create a résumé on page load.

What this Tool and Die Makers page does not claim

This page does not say what one Tool and Die Makers worker earns. It does not promise that a job pays the median. It does not state a starting wage. It does not explain why the mean and median differ. It does not add benefits, tips, stock, bonus pay, taxes, or work hours unless BLS includes them in the published wage measure.

The page does not count people who work for themselves. It does not turn 56,930 into current openings. It does not read private MeritLog jobs or Career Memory. MeritLog does not use the page to build a private career profile. While public analytics are on, GA4, Ahrefs, and Meta may get this page's URL. Use Your Privacy Choices or Global Privacy Control to turn that off. The page does not send its text to a model.

The best use is narrow and clear. Read the May 2025 BLS wage range. Check how the role changes by place. Add the separate 2024 BEA price level when an exact row exists. Inspect a dated employer-title match. Then make a résumé choice from facts you have confirmed. Keep each source tied to the question it can answer.